Resbuild Floorpatch

Heavy duty Epoxy mortar

Repairs to spalled or damaged concrete; chemical bunds; bedding pre-cast concrete beams; nosings on expansion joints; floor repairs. General repairs to cementitious substrates where strength and chemical resistant properties are essential.

Description

Resbuild Floorpatch is a high strength , trowel applied, three component Epoxy resin-based mortar designed for rapid and permanent repairs to concrete and masonry surfaces. Resbuild Floorpatch is a blend of epoxy Resin, Polyamine curing agent, graded siliceous aggregates and colour pigments. The mixed material is applied to a suitably prepared and primed surface, and quickly cures to form a durable, abrasion and chemical resistant repair.

Advantages

  • Pre-packed units – ready to use
  • Fast curing characteristics
  • Impact and abrasion resistant
  • Frost resistant and impervious to water
  • Excellent mechanical properties
  • Unaffected by a wide range of acids, and industrial chemicals
  • Negligible shrinkage  
  • High bond strength  
  • Cures under damp, cool conditions
Download data sheet

Typical Properties

Colour: Light grey(other colours available )

Density: 2200kg/m³

Pot Life: 50-60 minutes @ 20°C

Adhesion to concrete: >3.9MPa (concrete failure)

Compressive Strength: 72MPa

Tensile Strength: 12MPa

Taber abrasion resistance: 40mg weight loss (CS17 wheels; 1kg loads, 1000 cycles)

Thermal Coefficient of Linear Expansion: 3 x 10–5 cm/cm/°C

Maximum Service Temperature: 70°C continuous

Chemical resistance: Excellent resistance to 20% hydrochloric acid, 20% sulphuric acid, 10% citric acid, 25% sodium hydroxide, diesel and petrol. Very good resistance to 10% lactic acid, 50% phosphoric acid, 10% nitric acid and 5% acetic acid. Good resistance to many common industrial chemicals.