Resbuild Driveseal

Acrylic resin based sealer

As a curing/sealing treatment to new concrete. As a sealing/dust proofing treatment to patterned concrete and blocks to provide a sealed and dust-proof surface with resistance to the ingress of oil, petrol and chemical spillages.

Driveseal

Description

Resbuild Driveseal is a single pack, solvent-borne, clear Acrylic resin based curing compound, surface sealer and dust proofer for patterned concrete and block paving.

When applied to freshly placed concrete, Resbuild Driveseal functions as a curing membrane, reducing any tendency towards drying shrinkage cracks.

At the same time the surface becomes sealed against the ingress of oils and many aqueous chemicals, and a harder wearing floor is produced.

When applied to old/aged concrete floors, Resbuild Driveseal penetrates into the pore structure thereby sealing and dust proofing the surface.

Advantages

  • Easily applied by brush, roller or spray
  • Good chemical and abrasion resistance
  • Seals and dust proofs the surface
  • Provides easily cleanable floor surface
  • Internal and external use
  • Resistant to ultra violet radiation
  • Single pack – ready to use
Download data sheet

Typical Properties

Appearance:   Pale straw coloured liquid with characteristic odour

S.G.:  0.910g/cm³

Drying time @ 20°c: 

Tack free 2-4 hours 

Hard dry 16-24 hours

Flash point:  40°c

Chemical resistance:  Resistant to spillages of dilute mineral acids, caustic alkali solutions, vegetable oils, de-icing salts, etc.

;